Miniaturstecker weiß 2,6mm

LED lamps 3V/0.045 W / Item no. LM-LK10004. USB plug-in base lamps LED warm white, flat head These LED lamps must not be used together with incandescent lamps in a string of lights, but only in a suitable LED USB string of lights. Replacement bulbs for LED, 5 pieces for 10 and 20 USB fairy lights

Incense cones Pitti mixture 24 pieces Height approx. 27 mm Base diameter approx. 12 mm Safety information Incense cones, incense sticks and incense must only be used on a fireproof surface and under supervision. Please note that all incense burners can become hot during use.Therefore, always place incense burners on a temperature-resistant, non-flammable surface. Use a sufficiently large incense burner for each incense cone size! While incense burners smaller than 12 cm can be used for our minis (XS), incense figures with a minimum size of 13 cm are required for size M. The giants in sizes XL and XXL should only be burned in sufficiently large incense burners or special incense burners.

These beautiful clip-on stars with a church motif for mini tea lights were made to decorate Christmas tree lights. Clip-on figures are supplied in sets of 5. Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge Height: approx. 6 cm

USB LED strip, length 40 cm, half-USBSMD 2835. 60 LEDs per metre, 5V, 2.4W, warm white, IP20, white cable, cable switch, cable length 150 cm to switch, 50 cm to plug, total length 2 metres, USB plug (male), packed in foil bag.

USB 2.0 connection cable 3m supply cable 240V, white cable, 3x 0.75, with double switch and Euro plug, length 45 cm from stranded end to switch, 2m from switch to A-type 2.0 female/male plug

Made of paper, Ø approx. 40 cm, yellow For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately

Made of paper, Ø approx. 40 cm For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately

Made of plastic, Ø approx. 40 cm For self-assembly (instructions and assembly aid included) 1 additional cover cap is already included in the scope of delivery For indoor and outdoor use Please order lighting as an accessory separately (matching accessories) The stars in white/red and yellow/red require a cable with a red cover cap!

Miniature star – approx. 8 cm diameter , pre-assembled, for indoor use only , incl. LED (socket E5.5 / 6.3 V / warm white), cover cap, socket and cable (approx. 2 m) with plug. Please order power supply separately as an accessory.

A1e single star, green/white – approx. 13 cm diameter, fully assembled, incl . LED (6.3 V / 0.1 A / warm white – EXCEPT: A1e blue and blue-white with LED cool white) Cover cap, socket and cable (approx. 3 m) with plugs For indoor use only Important: Please order power supply as an accessory separately.

Details for cable 4m EU, Switzerland, UK, Australia white, 4m long for 230 V complete with hanging bracket, E14 socket, switch and LED 5W, 2350K, 440lm only suitable for indoor use!

USB 2.0 coupling socket, A-type, male/male

LED plug-in power supply 12V/2 ... 9 W white (German)

Made of plastic, Ø approx. 68 cm For self-assembly (instructions and assembly aid included) 1 additional cover cap is already included in the scope of delivery For indoor and outdoor use Please order lighting as an accessory separately (see matching accessories) The stars in white/red and yellow/red require a cable with a red cover cap! The Oberlausitz star in blue/yellow requires a cable set with a yellow cap.

Glass cones, green/brown, 12 pieces, 4.5 cm

Room lamp, small, craft set, as a base or shelf

Extension star chain A1s yellow LED for indoor and outdoor use

Herrnhut star chain with LED, A1 white, for indoor and outdoor use

Suitable for lighting Herrnhut stars A1e, A1b, I1 and miniature stars. This USB adapter transforms the USB voltage from 5V to 6.3V so that it is suitable for Herrnhut light bulbs. The USB adapter is pre-assembled with a cable (approx. 2.5m) and connection socket. Can only be used in conjunction with an existing USB power supply (mobile phone) or the USB interface of a PC (among other things). Alternatively, we offer a suitable USB power supply with 1000mA output power. Power supply not included – use of an existing USB power supply is possible with the following specifications: 5V DC / min. 500 mA - max. 1000mA The USB adapter must not be plugged directly into the mains socket! Lighting of several stars: (applies explicitly to the original USB power supply unit or those from third-party suppliers) Power supply unit at least 500mA: only with LED - max. 2 stars with incandescent lamp - max. 1 star Power supply unit maximum 1000mA: only with LED - max. 4 stars with incandescent lamp - max. 2 starsPC USB interface: only with LED - max. 2 starsalso suitable for up to 6 miniature stars (8 cm) A suitable USB power supply can be ordered as an option.

Drip catcher for 20 mm spouts