Flammkerze 34V 3W E10 matt

LED lamps 3V/0.045 W / Item no. LM-LK10004. USB plug-in base lamps LED warm white, flat head These LED lamps must not be used together with incandescent lamps in a string of lights, but only in a suitable LED USB string of lights. Replacement bulbs for LED, 5 pieces for 10 and 20 USB fairy lights

Incense cones Pitti mixture 24 pieces Height approx. 27 mm Base diameter approx. 12 mm Safety information Incense cones, incense sticks and incense must only be used on a fireproof surface and under supervision. Please note that all incense burners can become hot during use.Therefore, always place incense burners on a temperature-resistant, non-flammable surface. Use a sufficiently large incense burner for each incense cone size! While incense burners smaller than 12 cm can be used for our minis (XS), incense figures with a minimum size of 13 cm are required for size M. The giants in sizes XL and XXL should only be burned in sufficiently large incense burners or special incense burners.

Attachable stars, set of 5, bells Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge Height approx. 6 cm each

High-voltage fairy lights, 20 pieces, white cable, warm white, 3 V, 20 mA, 0.06 W, Ø 8 mm, replaceable bulbs, bulb spacing approx. 25 cm, without plug, packed in foil bag. Suitable replacement bulbs D9990-00-30-1 . ATTENTION! Only to be used in combination with item LKZ-220-16016000 (supply cable and transformer) 220 V!

String of lights, 20 lights, without power cord, warm white, 5V, 1.6W, white cable, cable length 25cm, replaceable LED bulbs, bulb spacing approx. 250 mm, with USB 2.0 Type A male connector, distance to first bulb 250mm, packaged in foil bag, EU version

Diameter: 20 cm Design: Flower, laser-cut, fully assembled Hub : natural Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Diameter: 20 cm Design: Flower, laser-cut, fully assembled Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Diameter: 23 cm Design: completely assembled, 2 mm hole Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Diameter: 28 cm Design: laser-cut, fully assembled Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

USB 2.0, 3-way power distributor, custom-made circuit board for concealed installation in the wooden structure, 100 mm cable to plug, A-type male plug. w/w/w/m

USB 2-port distributor Custom-made circuit board for concealed installation in the wooden structure, 100 mm cable to plug, A-type 2 x female 1 x male.

USB LED strip, length 60 cm, half USB SMD 2835.60 LEDs per metre, 5V, 3.6W, warm white, cord switch, IP20, white cable, cable length: 300 cm (150 cm to the switch, 150 cm from the switch to the plug), USB plug type A (male), packaged in a foil bag.

Remaining stock, supply cable for high-voltage LED light chain 230/240 V, length 160 cm

12 replacement balls, red/plain, for 9990-68/38

Glass cones, green/brown, 12 pieces, 4.5 cm

cb. 18 glass balls/capblack shiny 30 mm

Glass baubles, 18 pieces, 30 mm, shiny gold

cb. 18 glass balls/capopal natural combi 30 mm

cb. 18 glass balls/capcopper combi30 mm

Diameter: 20 cm Design: laser-cut, fully assembled, laser-cut stars Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge