Battery holder for lighting with timer, white, indoor use, 1 x A1e/A1b, 4 AA batteries
Battery holder for lighting with timer, white, indoor use, 1 x A1e/A1b, 4 AA batteries
€9.00
Available, delivery time: 2-5 days
Battery holder with timer function (6 hours)
Colour: white
4 batteries - AA, 1.5V 2
connection sockets for the star's lighting unit are- integrated
directly
into the housing - Suitable for lighting 1 star - A1e, A1b or I1 or 3 miniature stars
- Lighting
- can thus be provided independently of
- the mains power supply
- Lighting duration with quality batteries approx. 80
- h
- ours
Only
- suitable for indoor use
:
Timer function When switched to "Timer", the power supply runs for approx. 6 hours. After that, the star goes out. After another 18 hours, the battery holder activates again for 6 hours, i.e. at the same switch-on time the next day.
Note:
: May only be used with LEDs (E10, 6.3V -
0.6W - approx. 0.1A). The battery holder no longer
comes with an LED. If the star still comes with an incandescent bulb, this must be replaced with an LED.
Manufacturers
Similar products
Design: HERRNHUTER Material: plastic Size (Ø): 68 cm; A7 Colour: blue Protection class: IP23, for outdoor use Socket: E27 incl. 5 m black cable, plug incl . LED 4-6 W, 470-500 lumens
Made of paper, Ø approx. 40 cm, yellow For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately
Made of paper, Ø approx. 40 cm, red/white For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately
Made of paper, Ø approx. 40 cm For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately
Made of paper, yellow For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately
Made of plastic, Ø approx. 68 cm For self-assembly (instructions and assembly aid included) 1 additional cover cap is already included in the scope of delivery For indoor and outdoor use Please order lighting as an accessory separately (see matching accessories) The stars in white/red and yellow/red require a cable with a red cover cap! The Oberlausitz star in blue/yellow requires a cable set with a yellow cap.
A1e single star, yellow – approx. 13 cm diameter , fully assembled , incl. LED (6.3 V / 0.1 A / warm white – EXCEPT: A1e blue and blue-white with cold white LED), cover cap, socket and cable (approx. 3 m) with plugs , for indoor use only . Important: please order power supply as an accessory separately.
A1e single star, green – approx. 13 cm diameter , fully assembled , incl. LED (6.3 V / 0.1 A / warm white – EXCEPT: A1e blue and blue-white with cold white LED), cover cap, socket and cable (approx. 3 m) with plugs , for indoor use only . Important: please order power supply as an accessory separately.
A1e single star, green/white – approx. 13 cm diameter, fully assembled, incl . LED (6.3 V / 0.1 A / warm white – EXCEPT: A1e blue and blue-white with LED cool white) Cover cap, socket and cable (approx. 3 m) with plugs For indoor use only Important: Please order power supply as an accessory separately.
A1b Craft star – approx. 13 cm ø Kit for crafting the small star (see A1e) incl. LED (6.3V / 0.1A / warm white) EXCEPT: A1b blue and blue-white with LED cold white) Plastic adhesive, socket and approx. 3 m cable with plug are included Colour of plugs different from picture (colour white) For indoor use only Please order power supply separately as an accessory
A1b Craft star – approx. 13 cm ø Kit for crafting the small star (see A1e) incl. LED (6.3V / 0.1A / warm white) EXCEPT: A1b blue and blue-white with LED cold white) Plastic adhesive, socket and approx. 3 m cable with plug are included Colour of plugs different from picture (colour white) For indoor use only Please order power supply separately as an accessory
A1b Craft star – approx. 13 cm ø Kit for crafting the small star (see A1e) incl. LED (6.3V / 0.1A / warm white) EXCEPT: A1b blue and blue-white with LED cold white) Plastic adhesive, socket and approx. 3 m cable with plug are included Colour of plugs different from picture (colour white) For indoor use only Please order power supply separately as an accessory
Details for cable 4m EU, Switzerland, UK, Australia white, 4m long for 230 V complete with hanging bracket, E14 socket, switch and LED 5W, 2350K, 440lm only suitable for indoor use!
In conjunction with the Herrnhut USB adapter, suitable for lighting the Herrnhut stars A1e, A1b and I1 . Only suitable for indoor use. Output: DC: 5V=1ALighting of several: stars The power supply has an output power of 1000mA. This allows you to illuminate several : stars. Stars with LEDs only – max. 4 stars Stars with incandescent bulbs only – max. 2 stars
Holder for the Christmas tree top, suitable for attaching the single star A1e to the top of the Christmas tree. Included in : delivery: Plastic holder in dark green, 9 cable ties (including spare), length of holder approx. 10 cm.
Winter child, Herrnhut carol singers, electrically illuminated, 7.5 cm
Herrnhut craft set A1b, green, 13 cmHerrnhut star, plastic
Lighting E10 LED lighting for A1e/b and red cap
Rechargeable battery holder with timer and charging function (A1e/b.I1, miniature) Interior
Star arch, white lacquered, with A1e white/red