Replacement bulbs for LEDs, 5 pieces for 10 and 20 light chains (Duria)
Replacement bulbs for LEDs, 5 pieces for 10 and 20 light chains (Duria)
€4.00
Available, delivery time: 2-5 days
Replacement bulbs for LED, 5 pieces for 10 and 20
light
chains
LED
bulbs 3V/0.06 W / Duria item no. LM10003
Plug-in base bulbs LED warm white, flat
headThese LED bulbs must not be used together with incandescent bulbs in a string of lights,
but only in a suitable LED string of lights.
Manufacturers
Similar products
LED lamps 3V/0.045 W / Item no. LM-LK10004. USB plug-in base lamps LED warm white, flat head These LED lamps must not be used together with incandescent lamps in a string of lights, but only in a suitable LED USB string of lights. Replacement bulbs for LED, 5 pieces for 10 and 20 USB fairy lights
Incense cones Pitti mixture 24 pieces Height approx. 27 mm Base diameter approx. 12 mm Safety information Incense cones, incense sticks and incense must only be used on a fireproof surface and under supervision. Please note that all incense burners can become hot during use.Therefore, always place incense burners on a temperature-resistant, non-flammable surface. Use a sufficiently large incense burner for each incense cone size! While incense burners smaller than 12 cm can be used for our minis (XS), incense figures with a minimum size of 13 cm are required for size M. The giants in sizes XL and XXL should only be burned in sufficiently large incense burners or special incense burners.
Metal sleeves for tea lights Brass insert
USB LED strip, length 80 cm, half-USBSMD 2835.60 LEDs per metre, 5V, 4.8W, warm white, IP20, white cable, cable switch, cable length 150 cm to switch, 50 cm to plug, total length 2 metres, USB plug (male), packaged in foil bag
Carrying handle, plastic (for cardboard box) Width: 17.4 cm Black
Diameter: 16 cm Design: completely assembled Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge
Diameter: 20 cm Design: Flower, laser-cut, fully assembled Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge
Diameter: 28 cm Design: laser-cut, fully assembled Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge
USB 2.0, 3-way power distributor, custom-made circuit board for concealed installation in the wooden structure, 100 mm cable to plug, A-type male plug. w/w/w/m
USB 2-port distributor Custom-made circuit board for concealed installation in the wooden structure, 100 mm cable to plug, A-type 2 x female 1 x male.
Remaining stock, supply cable for high-voltage LED light chain 230/240 V, length 160 cm
Diameter: 23 cm Design: laser-cut, fully assembled, laser-cut stars Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge
6 replacement bells for D9990-68/66/bl
6 replacement bells for D9990-68-66-Red bells Height: glass 3 cm, with eyelet 4.2 cm
Glass bearings for pyramids Black glass knob as pyramid bearing, diameter= 12.1+/-0.5 mm, height 4.5+/-0.5 mm, recess 0.5 -0.7
Wood glue Express Meyco, 125 g bottle, fast-acting
Fence for crafting, 40 x 2.5 cm (LxH)
Glass baubles, light blue houses, 12 pieces, 3 cm
Assembly bag clips, red A4-A7 assembly aid/assembly bag