Radioröhrenlampe SKL 10*28mm E10 6,3V, 03A

Replacement bulbs for LED, 5 pieces for 10 and 20 light chains LED bulbs 3V/0.06 W / Duria item no. LM10003 Plug-in base bulbs LED warm white, flat headThese LED bulbs must not be used together with incandescent bulbs in a string of lights, but only in a suitable LED string of lights.

These beautiful clip-on stars with a church motif for mini tea lights were made to decorate Christmas tree lights. Clip-on figures are supplied in sets of 5. Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge Height: approx. 6 cm

USB 2.0 cable, white, with dimmer switch, for LED strip, length 2 m, male type A plug. 50 cm to the switch, 150 cm to the male type A USB plug.

Made of paper, yellow For self-assembly Mounting clips (metal) included 1 additional hanging bar is included in the scope of delivery For indoor use Please order lighting as an accessory separately

A1b Craft star – approx. 13 cm ø Kit for crafting the small star (see A1e) incl. LED (6.3V / 0.1A / warm white) EXCEPT: A1b blue and blue-white with LED cold white) Plastic adhesive, socket and approx. 3 m cable with plug are included Colour of plugs different from picture (colour white) For indoor use only Please order power supply separately as an accessory

For operating the lighting of 1-4 stars A1e / A1b / i1 (13 cm - with LED) For operating the lighting of 1 star A1e / A1b / i1 (13 cm – only with old incandescent bulbs) for lighting 1-10 miniature stars (8 cm – with LED) 6 V / 500 mA stabilised Cable length: approx. 1.5 m (+ 3 m on the star lighting) Instructions for use are included. Colour of the power supply unit: white Suitable for indoor use only! No-load current consumption of the transformer: 0.28 W

Hub for impeller, Ø 29 mm, hole 2 mm Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

cb. 18 glass balls/capsilver combi 30 mm

Diameter: 20 cm Design: laser-cut, fully assembled, laser-cut stars Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Diameter: 23 cm Design: completely assembled, hole 2.5 mm Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Diameter: 28 cm Design: completely assembled Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Diameter: 32 cm Design: laser-cut, individual wings Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

LED plug-in power supply 12V/8.4W white NS 12-8.4SLW (AMI)

USB 2-port distributor Custom-made circuit board for concealed installation in the wooden structure, 100 mm cable to plug, A-type 2 x female 1 x male.

USB LED strip, length 150 cm, full USBSMD 2835.60 LEDs per metre, 5V, 4.8W, warm white, IP20, white supply cable, length 10 cm, USB plug (female), packaged in foil bag.

USB LED strip, length 20 cm, full USB 60 SMD/metre LEDs per metre, 5 V, 1.2 W, warm white, IP20, white 5 V supply cable, length 10 cm, USB plug (female), packaged in a foil bag.

cb. 18 glassballs/capsteel combi30 mm

Diameter: 23 cm Design: fully assembled, 2 mm hole, 5 wings Genuine handicraft from RATAGS – Made in Germany – 100% original Erzgebirge

Glass ball, foliage green opal, 30 mm, 18 pcs.

Herrnhut star chain with LED, A1srot, for indoor and outdoor use